Submissions from 2007
Comparison of Material Properties and Microstructure of Specimens Built Using the 3D Systems Vanguard HS and Vanguard HiQ+HS SLS Systems, T.J. Silverman, Allison Kinney, W. Yong, and J.H. Koo
Evaluation of Conceptual Aircraft through Experimentation and Computation, Charles Tyler, Aaron Altman, Tim Fry, and Mike Neely
An Automotive Bulk Recycling Planning Model, Julie A. S. Williams, Sudaratana Wongweragiat, X. Qu, J. B. McGlinch, W. Bonawi-tan, Jun-Ki Choi, and J. Schiff
Submissions from 2006
Design of a Multifunctional Aircraft Skin With Energy Harvesting via Entropy Generation Minimization, Kristopher Ahlers, Brian Sanders, and Kevin P. Hallinan
Eliminate Final Exams in Intro to Flight Through the Use of Portfolios?, Aaron Altman
Energy Efficient Process Heating: Insulation and Thermal Mass, Kevin Carpenter and J. Kelly Kissock
Energy Efficient Process Heating: Managing Air Flow, Kevin Carpenter and J. Kelly Kissock
An Experimental Study on Lift Force Generation Resulting from Spanwise Flow in Flapping Wings, Young Sun Hong and Aaron Altman
Vortex Lift Contributions in the Spanwise Plane in Flapping Wings, Young Sun Hong and Aaron Altman
Angle of Attack and Planform Effects on Flat Plate Vortices at Low Reynolds Numbers, Sergey Kaplan, Aaron Altman, and Michael Ol
Measuring Plant-Wide Energy Savings, J. Kelly Kissock and Carl Eger
A Distance Metric for Finite Sets of Rigid-Body Displacements via the Polar Decomposition, Pierre M. Larochelle, Andrew P. Murray, and Jorge Angeles
Enhancing Thermoelectric Energy Recovery via Modulations of Source Temperature for Cyclical Heat Loadings, Robin McCarty, Kevin P. Hallinan, Brian Sanders, and Thada Somphone
Experimental Verification of Source Temperature Modulation via a Thermal Switch in Thermoelectric Energy Harvesting, Robin McCarty, Dylan Monaghan, Kevin P. Hallinan, and Brian Sanders
The Girl Scout Climbing Wall Multidisciplinary Service-Learning Project, Margaret Pinnell, Corinne M. Daprano, and Gabrielle Williamson
Submissions from 2005
Foundation of a New Investigation of Natural Flight Characteristics and Theory, Lionel D. Alford and Aaron Altman
Experiences Teaching Aircraft Design to Freshmen Non-Aerospace Engineering Students?, Aaron Altman
Quantifying Savings From Improved Boiler Operation, Kevin Carpenter and J. Kelly Kissock
Modeling of Automotive Recycling Planning in the United States, Jun-Ki Choi, J. A. Stuart, and Karthik Ramani
Product Node Architecture: A Systematic Approach to Provide Structured Flexibility in Distributed Product Development, Charles Chang-Woo Chung, Jun-Ki Choi, Karthik Ramani, and Harshal Patwardhan
Nanocharacterization of Bio-Silica Using Atomic Force and Ultrasonic Force Microscopy, Vinaypreet S. Gill, Kevin P. Hallinan, and N. S. Brar
Entropy Generation Metric for Evaluating and Forecasting Aircraft Energy Management Systems, Kevin P. Hallinan, Brian Sanders, Thada Somphone, and George Ephrem
Design, Construction, and Testing of a Folding-Wing, Tube-Launched Micro Air Vehicle, Jonathon Henry, David R. Schwartz, Michael A. Soukup, and Aaron Altman
Student Perspectives of Curriculum Integrated International Service-Learning Internships, Peter Kleinhenz, Margaret Pinnell, George Mertz, and Carl Eger III
Conceptual Design of Net Zero Energy Campus Residence, George A. Mertz, Gregory S. Raffio, J. Kelly Kissock, and Kevin P. Hallinan
Work in Progress: When Service-Learning is a Failure, Margaret Pinnell
Results of an Interlaboratory Study of the ASTM Standard Test Method for Tensile Properties of Polymer Matrix Composites D 3039, Margaret Pinnell, Richard Fields, and Ronald Zabora
Effects of the Liquid Polarity and the Wall Slip on the Heat and Mass Transport Characteristics of the Micro-Scale Evaporating Transition Film, Sang-Kwon Wee, Kenneth D. Kihm, and Kevin P. Hallinan
Submissions from 2004
Wavelike Characteristics of Low Reynolds Number Aerodynamics, Lionel D. Alford and Aaron Altman
Microscale Investigation of Thermo-Fluid Transport in the Transition FIL, Region of an Evaporating Capillary Meniscus Using a Microgravity Environment, Kenneth D. Kihm, Jeffrey S. Allen, Kevin P. Hallinan, and David M. Pratt
A Hybrid Method for Estimating Natural Lighting Potential in Buildings, J. Kelly Kissock
Lean Energy Analysis: Identifying, Discovering and Tracking Energy Savings Potential, J. Kelly Kissock and John Seryak
Understanding Manufacturing Energy Use Through Statistical Analysis, J. Kelly Kissock and John Seryak
Study of the Chemical and Physical Influences upon in Vitro Peptide-Mediated Silica Formation, Francisco Rodríguez, Diana D. Glawe, Rajesh R. Naik, Kevin P. Hallinan, and Morley O. Stone
Estimating Energy Savings in Compressed Air Systems, Chris Schmidt and J. Kelly Kissock
Submissions from 2003
High-Performance Micro-Electrohydrodynamic Pump Actuator, Kazim M. Ali, Ahmad Reza Kashani, and Kevin P. Hallinan
Microstructural Study of Nanoprecipitates in RRA Treated Al-7075 T6 Using AFM/UFM/STEM, Samuel J.M. Kuhr, Margaret Pinnell, and Daniel Eylon
Power Characteristics of Industrial Air Compressors, Chris Schmidt and J. Kelly Kissock
Temperature Control of Electrohydrodynamic Micro Heat Pipes, Zhiquan Yu, Kevin P. Hallinan, and Ahmad Reza Kashani
Submissions from 2002
A Comparative Study to Identify the Propeller-Driven HALE UAV Configuration with the Maximum Endurance Profile, Aaron Altman
A Computational Tool to Aid in the Teaching of Conceptual Design and Sizing, Aaron Altman
A Parametric Study on Design Variables Effecting Hale UAV Aircraft Design for a Conventional Configuration, Aaron Altman
A Different Path to Internationalization of Engineering Education, Kenneth Mark Bryden, Kevin P. Hallinan, and Margaret Pinnell
Submissions from 2001
Liquid Blockage of Vapor Transport Lines in Low Bond Number Systems Due to Capillary-Driven Flows in Condensed Annular Films, Jeffrey S. Allen and Kevin P. Hallinan
Balancing Technical and Social Issues: A New First-Year Design Course, Kevin P. Hallinan, Malcolm Daniels, and Steven I. Safferman
Energy and Waste Reduction Opportunities in Industrial Processes, J. Kelly Kissock, Kevin P. Hallinan, and Wayne Bader
Submissions from 2000
Micro-Scale Electrohydrodynamic Pumped High Performance Actuation, Ahmad Reza Kashani, S. Kang, and Kevin P. Hallinan
Submissions from 1999
Electro-hydrodynamic Pumped Hydraulic Actuation with Application to Active Vibration Control, Ahmad Reza Kashani, Sung Kang, and Kevin P. Hallinan
Burmester Lines of Spatial Five Position Synthesis from the Analysis of a 3-CPC Platform, Andrew P. Murray and J. Michael McCarthy
Submissions from 1998
A Study of the Fundamental Operations of a Capillary Driven Heat Transfer Device in Both Normal and Low Gravity Part 1-Liquid Slug Formation in Low Gravity, Jeffrey S. Allen, Kevin P. Hallinan, and Jack Lekan
Design Methodology for Low Speed High Altitude Long Endurance Unmanned Aerial Vehicles, Aaron Altman
Direct Simulation of a 1-D Shock with State-to-State Rotational Energy Exchange, Aaron Altman and Philip Varghese
A New Particle Image Velocimetry Technique for Three-Dimensional Full Field Fluid Flow Measurement in Evaporating Films, Q. He and Kevin P. Hallinan
Thermocapillary Effects on the Stability of a Heated, Curved Meniscus, David M. Pratt, Jeffrey R. Brown, and Kevin P. Hallinan
Effects of Thermo Capillary Stresses on the Capillary Limit of Capillary-Driven Heat Transfer Devices, David M. Pratt, Won Soon Chang, and Kevin P. Hallinan
Submissions from 1997
Center-Point Curves Through Six Arbitrary Points, Andrew P. Murray and J. Michael McCarthy
A Planar Quaternion Approach to the Kinematic Synthesis of a Parallel Manipulator, Andrew P. Murray, François Pierrot, Pierre Dauchez, and J. Michael McCarthy
A Feasibility Study of Fuel Cell Cogeneration in Industry, Scott B. Phelps and J. Kelly Kissock
Thermocapillary Effects on the Heat Transfer Effectiveness of a Heated, Curved Meniscus, David M. Pratt, Kevin P. Hallinan, and Won Soon Chang
Submissions from 1996
Passing a Central Axis Congruence Through Six Arbitrary Lines in Space, Andrew P. Murray and J. Michael McCarthy
An Examination of the Effect of Composite Constituent Properties on the Notched-Strength Performance of Composite Materials, Margaret Pinnell
An Investigation of Thermocapillary Effects on the Wetting Characteristics of a Heated, Capillary Re-Supplied, Curved Meniscus within a Capillary Pore, David M. Pratt and Kevin P. Hallinan
Submissions from 1995
Determining Burmester Points from the Analysis of a Planar Platform, Andrew P. Murray and J. Michael McCarthy
Submissions from 1993
Boundary Conditions for an Evaporating Thin Film for Isothermal Interfacial Conditions, Houssam C. Chebaro and Kevin P. Hallinan
Submissions from 1991
The Effect of Evaporation on the Capillary Pressure in Heat Pipes, Kevin P. Hallinan and Won Soon Chang
Submissions from 1986
Dynamics of a Natural Circulation Loop: Analysis and Experiments, Kevin P. Hallinan and R. Viskanta
Submissions from 1985
Heat Transfer from a Vertical Tube Bundle under Natural Circulation Conditions, Kevin P. Hallinan and Raymond Viskanta
