Submissions from 2012
Adaptive NbN/Ag Coatings for High Temperature Tribological Applications, D'Arcy S. Stone, Jeremiah Migas, Ashlie Martini, Timothy M. Smith, Christopher Muratore, Andrey A. Voevodin, and Samir M. Aouadi
Simultaneous and Sequential Protein and Organothiol Interactions with Gold Nanoparticles, Karthikeshwar Vangala, Kumudu Siriwardana, Erick S. Vasquez, Yan Xin, Charles U. Pittman Jr., Keisha B. Walters, and Dongmao Zhang
Submissions from 2011
Effect of Geometric Variations on the Performance of Gas Dispersion Impellers with Semicircular Blades, Julian B. Fasano, Kevin J. Myers, and Eric E. Janz
In situ Transmission Electron Microscopy of Solid–Liquid Phase Transition of Silica Encapsulated Bismuth Nanoparticles, Jianjun Hu, Yan Hong, Christopher Muratore, Ming Su, and Andrey A. Voevodin
Composite Films Prepared by Immersion Deposition of Manganese Oxide in Carbon Nanotubes Grown on Graphite for Supercapacitors, Lingchuan Li and Khalid Lafdi
Carbon Nanofiber Based Buckypaper used as a Thermal Interface Material, Muhammad Omar Memon, Sylvain Haillot, and Khalid Lafdi
In situ Raman Spectroscopy for Examination of High Temperature Tribological Processes, Christopher Muratore, John E. Bultman, Samir M. Aouadi, and Andrey A. Voevodin
Solids Suspension with Angle-Mounted Agitators in Unbaffled Vessels, Kevin J. Myers, Jonathan P. Herr, and Eric E. Janz
Catalyst Poisoning by Amorphous Carbon during Carbon Nanotube Growth: Fact or Fiction?, Christoph Schünemann, Franziska Schäffel, Alicja Bachmatiuk, Ute Queitsch, Maria Sparing, Bernd Rellinghaus, Khalid Lafdi, Ludwig Schultz, Bernd Büchner, and Mark H. Rümmeli
Submissions from 2010
Assessment of Carbon Foam Geometry during Copper Coating, Mohammad Rajab Almajali and Khalid Lafdi
Mechanical Properties of Copper-Coated Carbon Foams, Mohammad Rajab Almajali, Khalid Lafdi, P. H. Prodhomme, and Ozden O. Ochoa
Adaptive VN/Ag Nanocomposite Coatings with Lubricious Behavior from 25 to 1000 °C, Samir M. Aouadi, Dinesh P. Singh, D'Arcy S. Stone, Kyriaki Polychronopoulou, Farwah Nahif, Claus Rebholz, Christopher Muratore, and Andrey A. Voevodin
Functionalization of Carbon Nanofibers through Electron Beam Irradiation, Maria Cecília Evora, Donald A. Klosterman (0000-0002-4444-3810), Khalid Lafdi, Lingchuan Li, and Jandro L. Abot
Yttria-Stabilized Zirconia-Based Composites with Adaptive Thermal Conductivity, Jaime J. Gengler, Christopher Muratore, Ajit K. Roy, Jianjun Hu, Andrey A. Voevodin, Sukesh Roy, and James R. Gord
The Mechanisms of Gross Slip Fretting Wear on Nickel Oxide/Ti6Al4V Mated Surfaces, Carl H. Heger, Jianjun Hu, Christopher Muratore, Andrey A. Voevodin, and Ramana V. Grandhi
Electrostatic Quadrupole Plasma Mass Spectrometer Measurements during Thin Film Depositions using Simultaneous Matrix Assisted Pulsed Laser Evaporation and Magnetron Sputtering, Chad N. Hunter, Michael H. Check, Christopher Muratore, and Andrey A. Voevodin
In Situ Studies of TiC1−x N x Hard Coating Tribology, Marisa Rebelo de Figueiredo, Christopher Muratore, Robert Franz, Richard R. Chromik, Kathryn J. Wahl, Andrey A. Voevodin, Michel O'Sullivan, Markus Lechthaler, and Christian Mitterer
Multifunctional Hybrid Carbon Foams: Integrating Processing and Performance, Melanie D. Sarzynski, Khalid Lafdi, and Ozden O. Ochoa
C/C Composite, Carbon Nanotube and Paraffin Wax Hybrid Systems for the Thermal Control of Pulsed Power in Electronics, Shadab Shaikh and Khalid Lafdi
Layered Atomic Structures of Double Oxides for Low Shear Strength at High Temperatures, D'Arcy S. Stone, Jia Liu, Dinesh P. Singh, Christopher Muratore, Andrey A. Voevodin, Sanjay Mishra, Claus Rebholz, Qingfeng Ge, and Samir M. Aouadi
MD Simulations of Molybdenum Disulphide (MoS2): Force-Field Parameterization and Thermal Transport Behavior, Vikas Varshney, Soumya S. Patnaik, Christopher Muratore, Ajit K. Roy, Andrey A. Voevodin, and Barry L. Farmer
Submissions from 2009
Progress in the Development of Adaptive Nitride-Based Coatings for High Temperature Tribological Applications, Samir M. Aouadi, Brandon Luster, Punit Kohli, Christopher Muratore, and Andrey A. Voevodin
Tribological Investigation of Adaptive Mo2N/MoS2/Ag Coatings with High Sulfur Content, Samir M. Aouadi, Yadab Paudel, William J. Simonson, Qingfeng Ge, Punit Kohli, Christopher Muratore, and Andrey A. Voevodin
Tribological Properties of Pulsed Laser Deposited Mo–S–Te Composite Films at Moderate High Temperatures, Jianjun Hu, John E. Bultman, Christopher Muratore, Benjamin S. Phillips, Jeffrey S. Zabinski, and Andrey A. Voevodin
Thermal Properties of Copper-Coated Carbon Foams, Khalid Lafdi, Mohammad Rajab Almajali, and Omar Huzayyin
Tribological Coatings for Lubrication over Multiple Thermal Cycles, Christopher Muratore, Jianjun Hu, and Andrey A. Voevodin
Chameleon Coatings: Adaptive Surfaces to Reduce Friction and Wear in Extreme Environments, Christopher Muratore and Andrey A. Voevodin
Control of Molybdenum Disulfide Basal Plane Orientation during Coating Growth in Pulsed Magnetron Sputtering Discharges, Christopher Muratore and Andrey A. Voevodin
Carbon Nanotube−MoS2 Composites as Solid Lubricants, Xianfeng Zhang, Brandon Luster, Amelia Church, Christopher Muratore, Andrey A. Voevodin, Punit Kohli, Samir M. Aouadi, and Saikat Talapatra
Submissions from 2008
Adaptive Mo2N/MoS2/Ag Tribological Nanocomposite Coatings for Aerospace Applications, Samir M. Aouadi, Yadab Paudel, Brandon Luster, Shane Stadler, Punit Kohli, Christopher Muratore, Carl Hager, and Andrey A. Voevodin
Surface Texturing for Adaptive Solid Lubrication, Prakash Basnyat, Brandon Luster, Christopher Muratore, Andrey A. Voevodin, Richard T. Haasch, Rashid Zakeri, Punit Kohli, and Samir M. Aouadi
A Novel Approach to Control Growth, Orientation, and Shape of Human Osteoblasts, Jarema S. Czarnecki, Khalid Lafdi, and Panagiotis A. Tsonis
Deposition and Characterization of Hybrid Filtered Arc/Magnetron Multilayer Nanocomposite Cermet Coatings for Advanced Tribological Applications, Vladimir I. Gorokovsky, Chris Bowman, Paul E. Gannon, David VanVorous, Andrey A. Voevodin, Christopher Muratore, Young Sup Kang, and Jianjun Hu
A Possible Link Between Macroscopic Wear and Temperature Dependent Friction Behaviors of MoS2 Coatings, Matthew A. Hamilton, Luis A. Alvarez, Nathan A. Mauntler, Nicolas Argibay, Rachel Colbert, David L. Burris, Christopher Muratore, Andrey A. Voevodin, Scott S. Perry, and W. Gregory Sawyer
Nitrogen and Hydrogen Plasma Treatments of Multiwalled Carbon Nanotubes, John G. Jones, A. R. Waite, Christopher Muratore, and Andrey A. Voevodin
Effect of Carbon Nanofiber-Matrix Adhesion on Polymeric Nanocomposite Properties—Part II, Khalid Lafdi, William Fox, Matthew Matzek, and Emel Yildiz
Graphite Foams Infiltrated with Phase Change Materials as Alternative Materials for Space and Terrestrial Thermal Energy Storage Applications, Khalid Lafdi, Osama Mesalam Mesalhy, and Ahmed Elgafy
Merits of Employing Foam Encapsulated Phase Change Materials for Pulsed Power Electronics Cooling Applications, Khalid Lafdi, Osama Mesalam Mesalhy, and Ahmed Elgafy
Nickel Modification of Carbon Nanotubes Grown on Graphite for Electrochemical Sensors, Lingchuan Li and Khalid Lafdi
Thermal Damage Approach of Concrete: Application to Specimens Subjected to Combined Compressive and High Temperature Loads, Abdellah Menou, Ghassan Mounajed, Hocine Boussa, Christian La Borderie, and Khalid Lafdi
Smart Tribological Coatings with Wear Sensing Capability, Christopher Muratore, David R. Clarke, John G. Jones, and Andrey A. Voevodin
Carbon Nanoadditives to Enhance Latent Energy Storage of Phase Change Materials, Shadab Shaikh, Khalid Lafdi, and Kevin P. Hallinan
Submissions from 2007
Interfacial and Capillary Pressure Effects on the Thermal Performance of Wax/Foam Composites, Mohammad Rajab Almajali, Khalid Lafdi, and Shadab Shaikh
Signaling Pathways Activated by Interleukin-2 and Interluekin-4 Receptors Mediate T Lymphocyte Clonal Expansion, Kristen K. Comfort
Intracellular Signaling Networks in the Immune Response: Interleukin-4 introduces Competition and Cooperation to Interleukin-2-Induced T Cell Proliferation, Kristen K. Comfort and Jason Haugh
Use of Exfoliated Graphite Filler to Enhance Polymer Physical Properties, Bryan Debelak and Khalid Lafdi
Engineering Solution in Monitoring Nanoparticle-Fluid Flow During Nanocomposites Processing, Ahmed Elgafy and Khalid Lafdi
Effect of Particle Dimension on Biocompatibility of Carbon Nanomaterials, Christin Grabinski, Saber M. Hussain, Khalid Lafdi, Laura Braydich-Stolle, and John J. Schlager
Silver Diffusion and High-Temperature Lubrication Mechanisms of YSZ–Ag–Mo Based Nanocomposite Coatings, Jianjun Hu, Christopher Muratore, and Andrey A. Voevodin
Effect of Carbon Nanofiber Heat Treatment on Physical Properties of Polymeric Nanocomposites—Part I, Khalid Lafdi, William Fox, Matthew Matzek, and Emel Yildiz
Experimental Study on the Influence of Foam Porosity and Pore Size on the Melting of Phase Change Materials, Khalid Lafdi, Osama Mesalam Mesalhy, and Shadab Shaikh
The Effect of Surface Energy on the Heat Transfer Enhancement of Paraffin Wax/Carbon Foam Composites, Khalid Lafdi, Osama Mesalam Mesalhy, and Shadab Shaikh
Adaptive Nanocomposite Coatings with a Titanium Nitride Diffusion Barrier Mask for High-Temperature Tribological Applications, Christopher Muratore, Jianjun Hu, and Andrey A. Voevodin
Oxygen Plasma Treatment and Deposition of CNx on a Fluorinated Polymer Matrix Composite for Improved Erosion Resistance, Christopher Muratore, Andras Korenyi-Both, John E. Bultman, A. R. Waite, John G. Jones, T. M. Storage, and Andrey A. Voevodin
Lithium/Air Cell: Preliminary Mathematical Formulation and Analysis, Sarwan S. Sandhu, George W. Brutchen, and Joseph P. Fellner
Diffusion-Limited Model for a Lithium/Air Battery with an Organic Electrolyte, Sarwan S. Sandhu, Joseph P. Fellner, and George W. Brutchen
Thermal Conductivity Improvement in Carbon Nanoparticle Doped PAO Oil: An Experimental Study, Shadab Shaikh, Khalid Lafdi, and Rengasamy Ponnappan
The Effect of a CNT Interface on the Thermal Resistance of Contacting Surfaces, Shadab Shaikh, Khalid Lafdi, and Edward Silverman
Thermal Conductivity of an Aligned Carbon Nanotube Array, Shadab Shaikh, Lingchuan Li, Khalid Lafdi, and J. Huie
Submissions from 2006
Novel High Strength Graphitic Foams, Thomas Beechem and Khalid Lafdi
Intracellular Signaling Networks in the Immune Response: Pathways Activated by Interleukin-2 and-4 Receptors and Their Roles in T Cell Proliferation, Kristen K. Comfort
Tunable Friction Behavior of Oriented Carbon Nanotube Films, Pamela L. Dickrell, Sunil K. Pal, Gerald R. Bourne, Christopher Muratore, Andrey A. Voevodin, Pulickel M. Ajayan, Linda S. Schadler, and W. Gregory Sawyer
Carbon Nanofluids Flow Behavior in Novel Composites, Ahmed Elgafy and Khalid Lafdi
Carbon Nanoparticle-Filled Polymer Flow in the Fabrication of Novel Fiber Composites, Ahmed Elgafy and Khalid Lafdi
Tribological Performance of Hybrid Filtered Arc-Magnetron Coatings: Part I: Coating Deposition Process and Basic Coating Properties Characterization, Vladimir I. Gorokovsky, Chris Bowman, Paul E. Gannon, David VanVorous, Andrey A. Voevodin, Adam Rutkowski, Christopher Muratore, Richard J. Smith, Asghar Kayani, David Gelles, Vaithiyalingam Shutthanandan, and Boris G. Trusov
Plasma Diagnostics of Hybrid Magnetron Sputtering and Pulsed Laser Deposition, John G. Jones, Christopher Muratore, Adam R. Waite, and Andrey A. Voevodin
Carbon Foam Matrices Saturated with PCM for Thermal Protection Purposes, Osama Mesalam Mesalhy, Khalid Lafdi, and Ahmed Elgafy
Molybdenum Disulfide as a Lubricant and Catalyst in Adaptive Nanocomposite Coatings, Christopher Muratore and Andrey A. Voevodin
Multilayered YSZ–Ag–Mo/TiN adaptive tribological nanocomposite coatings, Christopher Muratore, Andrey A. Voevodin, Jianjun Hu, and Jeffrey S. Zabinski
Tribology of Adaptive Nanocomposite Yttria-Stabilized Zirconia Coatings Containing Silver and Molybdenum from 25 to 700 °C, Christopher Muratore, Andrey A. Voevodin, Jianjun Hu, and Jeffrey S. Zabinski
Control of Plasma Flux Composition Incident on TiN Films during reactive Magnetron Sputtering and the Effect on Film Microstructure, Christopher Muratore, Scott G. Walton, Darrin Leonhardt, and Richard F. Fernsler
Performance/Design Formulation for a Solid Polymer Based Acid Electrolyte Hydrogen/Air Fuel Cell, Sarwan S. Sandhu and Joseph P. Fellner
Effect of Multiple Phase Change Materials (PCMs) Slab Configurations on Thermal Energy Storage, Shadab Shaikh and Khalid Lafdi
Submissions from 2005
Bubble Growth Mechanism in Carbon Foams, Thomas Beechem, Khalid Lafdi, and Ahmed Elgafy
Hierarchical Morphology of Carbon Single-Walled Nanotubes during Sonication in an Aliphatic Diamine, Janis M. Brown, David P. Anderson, Ryan S. Justice, Khalid Lafdi, Max Belfor, Karla L. Strong, and Dale W. Schaefer
Multi-scale Mechanics of Nanocomposites including Interface: Experimental and Numerical Investigation, Valeriy Buryachenko, Ajit Roy, Khalid Lafdi, Kelly L. Anderson, and S. Chellapilla
Effect of Carbon Nanofiber Additives on Thermal Behavior of Phase Change Materials, Ahmed Elgafy and Khalid Lafdi
Applications of Electron-Beam Generated Plasmas to Materials Processing, Darrin Leonhardt, Christopher Muratore, and Scott G. Walton
Numerical Study for Enhancing the Thermal Conductivity of Phase Change Material (PCM) Storage using High Thermal Conductivity Porous Matrix, Osama Mesalam Mesalhy, Khalid Lafdi, Ahmed Elgafy, and Keith Bowman
Low-Temperature Nitriding of Stainless Steel in an Electron Beam Generated Plasma, Christopher Muratore, Darrin Leonhardt, Scott G. Walton, David D. Blackwell, Richard F. Fernsler, and Robert A. Meger
Growth and Characterization of Nanocomposite Yttria-Stabilized Zirconia with Ag and Mo, Christopher Muratore, Andrey A. Voevodin, Jianjun Hu, John G. Jones, and Jeffrey S. Zabinski
Study of the Growth and Motion of Graphitic Foam Bubbles, Gregory Rosebrock, Ahmed Elgafy, Thomas Beechem, and Khalid Lafdi
Prediction of Methanol and Water Fluxes through a Direct Methanol Fuel Cell Polymer Electrolyte Membrane, Sarwan S. Sandhu, R. O. Crowther, and Joseph P. Fellner
A Reformer Performance Model for Fuel Cell Applications, Sarwan S. Sandhu, Yousef A. Saif, and Joseph P. Fellner
Recent Advances in Hard, Tough, and Low Friction Nanocomposite Coatings, Andrey A. Voevodin, Jeffrey S. Zabinski, and Christopher Muratore
Submissions from 2004
Numerical and Experimental Investigations of Melting and Solidification Processes of High Melting Point PCM in a Cylindrical Enclosure, Ahmed Elgafy, Osama Mesalam Mesalhy, and Khalid Lafdi
Generation of Electron-Beam Produced Plasmas and Applications to Surface Modification, Darrin Leonhardt, Christopher Muratore, Scott G. Walton, David D. Blackwell, Richard F. Fernsler, and Robert A. Meger
Plasma Enhanced Surface Treatments using Electron Beam-Generated Plasmas, Darrin Leonhardt, Christopher Muratore, Scott G. Walton, and Robert A. Meger
Etching with Electron Beam Generated Plasmas, D. Leonhardt, Scott G. Walton, Christopher Muratore, Richard F. Fernsler, and R. A. Meger
Effect of Plasma Flux Composition on the Nitriding Rate of Stainless Steel, Christopher Muratore, Scott G. Walton, D. Leonhardt, Richard F. Fernsler, David D. Blackwell, and R. A. Meger
Use of Novel Carbon-Nanofiber-Doped Carbon Liquid Crystals as Suitable Adsorbents for Hydrogen Storage, Dinesh Singh Rawat, Saikat Talapatra, Khalid Lafdi, and Aldo D. Migone
Electron-Beam-Generated Plasmas for Materials Processing, Scott G. Walton, Christopher Muratore, Darrin Leonhardt, Richard F. Fernsler, David D. Blackwell, and Robert A. Meger
Submissions from 2003
Numerical Modeling of the Carbonization Process in the Manufacture of Carbon/Carbon Composites, Jungin Kim, Woo Il Lee, and Khalid Lafdi
Electrostatic Quadrupole Plasma Mass Spectrometer and Langmuir Probe Measurements of Mid-Frequency Pulsed DC Magnetron Discharges, Christopher Muratore, John J. Moore, and John Alan Rees
Direct Methanol Polymer Electrolyte Fuel Cell Modeling: Reversible Open-Circuit Voltage and Species Flux Equations, Sarwan S. Sandhu, R. O. Crowther, S. C. Krishnan, and Joseph F. Fellner
Purification Process for Single-Wall Carbon Nanotubes, Karla L. Strong, David P. Anderson, Khalid Lafdi, and John N. Kuhn
Submissions from 2002
Dynamic Bond Length as an Explanation for the Flexibility of Graphene Layers, J. F. Després, E. Daguerre, and Khalid Lafdi
Adsorbate Binding Energy and Adsorption Capacity of Xenon on Carbon Nanohorns, Antonio Zambano, Saikat Talapatra, Khalid Lafdi, M. T. Aziz, W. McMillin, Gabe Shaughnessy, Aldo D. Migone, Masako Yudasaka, Sumio Iijima, F. Kokai, and K. Takahashi
Submissions from 2001
Friction and Wear Transitions in Carbons (Temperature and Stress Analysis), Kia-Moh Teo and Khalid Lafdi
Submissions from 2000
Thermal Diffusivity Mapping of Friction Surface Using Photo-Thermal Technique, Kia-Moh Teo and Khalid Lafdi
